← The Collection
Double finger ring connecting the ring finger and pinky, 10K gold, shaped like a 7.62 caliber bullet, with the number 47 positioned between the two fingers, diamonds only on the numbers, realistic luxury jewelry render photorealistic jewelry design, Double finger ring connecting the ring finger and pinky, 10K gold, shaped like a 7.62 caliber bullet, with the number 47 positioned between the two fingers, diamonds only on the numbers, realistic luxury jewelry render, just the design no text
none

Double finger ring connecting the ring finger and pinky, 10K gold, shaped like a 7.62 caliber bullet, with the number 47 positioned between the two fingers, diamonds only on the numbers, realistic luxury jewelry render

Design something like thisTry it on virtually

Keep exploring

More None

Beautiful rose gold necklace

Beautiful rose gold necklace

bezel should be thinner to none when it reach the east and west sides of the oval

bezel should be thinner to none when it reach the east and west sides of the oval

the bezel seamlessly difuse from thick at north south to thin then none east west and in platinum

the bezel seamlessly difuse from thick at north south to thin then none east west and in platinum

Dobilo ziedas , serveteles ziedai restoranui, gintaras sidabras, keleta variantu

Dobilo ziedas , serveteles ziedai restoranui, gintaras sidabras, keleta variantu

Create a photorealistic high-jewelry pendant based strictly on the uploaded sketch. Preserve the exact silhouette, proportions, number of diamonds, positions, spacing, negative spaces and overall composition. Keep the central diamond as the dominant hero stone and preserve the four surrounding diamonds and their individual cuts and orientations. Use minimal refined 18K yellow gold, realistic secure settings and physically believable construction. Render exceptional natural white diamonds with crisp facets, realistic fire, scintillation and refraction. Contemporary haute joaillerie, sophisticated, elegant, minimal, luxurious, competition-level craftsmanship, pure white background and professional jewelry studio lighting. Do not redesign, add, remove or rearrange any element.

Create a photorealistic high-jewelry pendant based strictly on the uploaded sketch. Preserve the exact silhouette, propo...

I want a ring with three stones, purple, green, red. And I want it to be overly gothic, kinda like the universe Warhammer 40K

I want a ring with three stones, purple, green, red. And I want it to be overly gothic, kinda like the universe Warhamme...

White gold hoop earrings, flat with yellow brown diamonds 3.2 mm in the center, english clasp

White gold hoop earrings, flat with yellow brown diamonds 3.2 mm in the center, english clasp

Create a highly accurate 3D jewelry design based on the supplied reference image. Reproduce the ring’s overall architecture, proportions, stone placement, flowing metalwork, and botanical aesthetic as closely as possible. The ring is an elegant white-gold botanical/Art Nouveau–inspired cocktail ring built around a vertically oriented oval cabochon center stone. The center stone is held by four substantial sculptural claw prongs positioned approximately at the upper-left, upper-right, lower-right, and lower-left quadrants. The claws should emerge organically from the surrounding metalwork rather than appearing as separate straight prongs. Surround the center stone with a thin polished oval support/gallery following the stone’s outline. From this central structure, create asymmetrical flowing vines and branches that sweep outward across the shoulders of the ring. The vines should form graceful S-curves and loops, creating an open, airy framework rather than a solid halo. Incorporate leaf-shaped elements into the vines. Each leaf should have a pointed marquise-shaped outline, polished raised border, recessed interior, and a small round accent-stone setting centered within it. Leaves should appear to grow naturally from the curved branches. Add alternating round ruby and diamond accent settings throughout the vine structure. Use several different accent-stone sizes rather than making every stone identical. Larger rubies should act as visual anchors, with smaller rubies and diamonds filling transitional spaces. All round stones should use delicate individual prong settings integrated into the vines. Preserve the reference image’s intentionally asymmetrical composition: the right side rises higher and contains a more elaborate cluster of leaves, rubies, and diamonds, while the left side remains slightly lower and more restrained. Despite the asymmetry, the finished design should feel visually balanced around the center stone. The shoulders should transition into split, intertwined vine-like rails, eventually merging smoothly into a conventional polished rounded band toward the bottom of the shank. Maintain open negative spaces between the vines so the ring remains delicate rather than becoming a solid mass of metal. Important construction details: all decorative vines must physically connect to the main gallery or shoulders; every gemstone setting must have adequate metal beneath it; no floating components; no unsupported prongs; no impossibly thin wires; no intersecting geometry. Prongs should have sufficient thickness for casting and final stone setting. The center basket should provide continuous structural support beneath the cabochon while allowing an open underside. Finish: highly polished white gold, smooth organic transitions, rounded edges, fine-jewelry proportions, realistic castable construction. Avoid bulky CAD geometry, oversized prongs, generic halo-ring architecture, perfect bilateral symmetry, or disconnected decorative elements. Priority: match the reference ring’s silhouette and layout before introducing any creative interpretation. Treat the supplied image as the primary design reference. The finished model should immediately be recognizable as the same ring when viewed from the same three-quarter angle.

Create a highly accurate 3D jewelry design based on the supplied reference image. Reproduce the ring’s overall architect...

Create a highly accurate 3D jewelry design based on the supplied reference image. Reproduce the ring’s overall architecture, proportions, stone placement, flowing metalwork, and botanical aesthetic as closely as possible. The ring is an elegant white-gold botanical/Art Nouveau–inspired cocktail ring built around a vertically oriented oval black lightning ridge opal cabochon center stone. The center stone is held by four substantial sculptural claw prongs positioned approximately at the upper-left, upper-right, lower-right, and lower-left quadrants. The claws should emerge organically from the surrounding metalwork rather than appearing as separate straight prongs. Surround the center stone with a thin polished oval support/gallery following the stone’s outline. From this central structure, create asymmetrical flowing vines and branches that sweep outward across the shoulders of the ring. The vines should form graceful S-curves and loops, creating an open, airy framework rather than a solid halo. Incorporate leaf-shaped elements into the vines. Each leaf should have a pointed marquise-shaped outline, polished raised border, recessed interior, and a small round accent-stone setting centered within it. Leaves should appear to grow naturally from the curved branches. Add alternating round ruby and diamond accent settings throughout the vine structure. Use several different accent-stone sizes rather than making every stone identical. Larger rubies should act as visual anchors, with smaller rubies and diamonds filling transitional spaces. All round stones should use delicate individual prong settings integrated into the vines. Preserve the reference image’s intentionally asymmetrical composition: the right side rises higher and contains a more elaborate cluster of leaves, rubies, and diamonds, while the left side remains slightly lower and more restrained. Despite the asymmetry, the finished design should feel visually balanced around the center stone. The shoulders should transition into split, intertwined vine-like rails, eventually merging smoothly into a conventional polished rounded band toward the bottom of the shank. Maintain open negative spaces between the vines so the ring remains delicate rather than becoming a solid mass of metal. Important construction details: all decorative vines must physically connect to the main gallery or shoulders; every gemstone setting must have adequate metal beneath it; no floating components; no unsupported prongs; no impossibly thin wires; no intersecting geometry. Prongs should have sufficient thickness for casting and final stone setting. The center basket should provide continuous structural support beneath the cabochon while allowing an open underside. Finish: highly polished white gold, smooth organic transitions, rounded edges, fine-jewelry proportions, realistic castable construction. Avoid bulky CAD geometry, oversized prongs, generic halo-ring architecture, perfect bilateral symmetry, or disconnected decorative elements. Priority: match the reference ring’s silhouette and layout before introducing any creative interpretation. Treat the supplied image as the primary design reference. The finished model should immediately be recognizable as the same ring when viewed from the same three-quarter angle. Required dimensions: US ring size 7. Center setting designed specifically for a 6.0 × 7.2 mm oval cabochon. Model the center stone only as a removable reference volume; final manufacturing model should contain an empty seat for the cabochon. All accent gemstones should likewise be represented as setting blanks/seats rather than permanent stones. Preserve the apparent proportions of the reference design while scaling the surrounding ornamentation appropriately around the 6.0 × 7.2 mm center. Design for lost-wax investment casting and subsequent hand stone setting. Use practical minimum wall thicknesses, structurally supported galleries, properly connected prongs, accessible stone seats, and sufficient finishing allowance. Produce a watertight/manifold solid suitable for STL export, with no floating shells, non-manifold edges, self-intersections, or decorative geometry that cannot be cast or finished.

Create a highly accurate 3D jewelry design based on the supplied reference image. Reproduce the ring’s overall architect...

Men’s Persian signet ring, elephant shank, oval carnelian agate, raised crown setting, yellow gold

Men’s Persian signet ring, elephant shank, oval carnelian agate, raised crown setting, yellow gold

Double finger ring connecting the ring finger and pinky, 10K gold, shaped like a 7.62 caliber bullet, with the number 47 positioned between the two fingers, diamonds only on the numbers, realistic luxury jewelry render

Double finger ring connecting the ring finger and pinky, 10K gold, shaped like a 7.62 caliber bullet, with the number 47...

Hot pink Rolex watch

Hot pink Rolex watch

Watch Dial: Positioned in the center of the bracelet, featuring a small, elegant round shape with a polished gold bezel, golden dial face, minimalist gold hour markers, and hands. Bracelet Straps: Extending from both sides of the watch face are intricate leafy/floral-patterned straps, richly studded with alternating red ruby-like and clear diamond-like marquise-cut gems set in gold prong settings. Clasp & Detail: At the bottom end of the bracelet hangs a detailed gold connector ring with decorative textured embellishments.

Watch Dial: Positioned in the center of the bracelet, featuring a small, elegant round shape with a polished gold bezel,...

1.60 emerald cut and 1 ct marquise half bezel ring with curves

1.60 emerald cut and 1 ct marquise half bezel ring with curves

Create a modern, sculptural bypass engagement ring in 18K gold. The design should feature two different center diamonds placed opposite each other: a 1.04 ct natural marquise diamond, measuring 10.52 × 5.13 × 3.32 mm, on the left, and a 1.61 ct lab-grown emerald-cut diamond, measuring 8.12 × 5.51 × 3.48 mm, on the right. Both stones should be half bezel set, with the metal following the sides of each stone while leaving the top and bottom portions open to showcase the diamonds. The shank should have two flowing, curved bands that cross/bypass around the two stones, creating an open negative-space look similar to the reference image. Keep the design smooth, substantial, elegant, and wearable—not overly delicate.

Create a modern, sculptural bypass engagement ring in 18K gold. The design should feature two different center diamonds ...

Silver ring eith green avantiurin stone in all the midlle of all ring

Silver ring eith green avantiurin stone in all the midlle of all ring

Una collana d’oro sottile con al centro un piccolo cristallo a cerchio

Una collana d’oro sottile con al centro un piccolo cristallo a cerchio

Luxury brooch

Luxury brooch

Diamond wedding ring

Diamond wedding ring

Do a complet set tela colorr a ring a barcaletee and a ring neckles

Do a complet set tela colorr a ring a barcaletee and a ring neckles

bracciale bangles spesso circa 1 cm in oro con pietre piccoline

bracciale bangles spesso circa 1 cm in oro con pietre piccoline

Create a sophisticated and delicate jewelry design for the AURA GEM collection. Design a pair of long, dangling earrings in 925 sterling silver, featuring approximately three natural oval gemstones measuring 6 mm x 4 mm in each earring, arranged vertically in a continuous sequence: • AMETHYST — upper stone • PERIDOT — center stone • AMETHYST — lower stone The three gemstones should appear visually connected, forming a single continuous, fluid, and elegant vertical composition. IMPORTANT: DO NOT use visible jump rings, links, chains, large connectors, or bulky metal elements between the gemstones. The silver structure should be extremely thin and delicate, creating an organic and almost imperceptible transition from one stone to the next, as if the gemstones were integrated into one continuous piece of jewelry. The gemstones must be OVAL, NOT pear-shaped or teardrop-shaped. Maintain an approximate size of 6 x 4 mm, with a delicate faceted cut and natural brilliance. The earrings should have a lightweight, feminine, sophisticated, and contemporary appearance, with an elongated silhouette and subtle movement when worn. The central peridot should create an elegant contrast between the two purple amethysts. Aesthetic: fine jewelry, minimalist, luxurious, and distinctive. The sterling silver should have a polished, delicate finish, with small and discreet prongs and no excessive metal. The final result should look like a real high-end jewelry piece from the AURA GEM collection: elegant, mystical, sophisticated, and delicate, without looking heavy or exaggerated. Show the earrings from the front, with all three gemstones clearly visible and perfectly aligned, emphasizing the seamless continuity between each stone.

Create a sophisticated and delicate jewelry design for the AURA GEM collection. Design a pair of long, dangling earring...

Cad bangles

Cad bangles

Fancy bangles

Fancy bangles

Cad plain necklace

Cad plain necklace

Diamond rain

Diamond rain

Basketball diamonds white and blacks black diamonds as lines

Basketball diamonds white and blacks black diamonds as lines

5mm pearls in one line all around the neck and three Cherry charms 2mm with gold lining,one in the middle of the necklace and the other 2 must be 5 pearls apart from the middle one,one on the right and one on the left

5mm pearls in one line all around the neck and three Cherry charms 2mm with gold lining,one in the middle of the necklac...

I like lab diamond (CVD) Should be between D E F diamond color Ideal cut not too deep or shallow Want 2 carats diamond or 1.9 carats Clarity VS1 or VS2 I want 20k or 22k natural yellow gold I like radiant Want cathedral No stem setting Want low dome band Plain band 2 width and 2 mm thick Euroshank bottom

I like lab diamond (CVD) Should be between D E F diamond color Ideal cut not too deep or shallow Want 2 carats diamond...

Habsha traditional, January

Habsha traditional, January

UAE gold

UAE gold

Gents ring solid

Gents ring solid

Gents ring solid

Gents ring solid

Masculine wedding band and gold 14 karat Center stone 0.50 carats sunburst with 0.01 diamonds on X axis of sun burst Side 2 stones 0.25 carats sunburns with 0.1 diamonds on X access Five vertical columns with three 0.1 diamonds

Masculine wedding band and gold 14 karat Center stone 0.50 carats sunburst with 0.01 diamonds on X axis of sun burst Sid...

Center 0.50 ct stone receives the largest sunburst. * Two 0.25 ct side stones receive proportionally smaller sunbursts. * The sunburst points are sharp and geometric rather than rounded. * The small X-axis accents complement the points of the stars. Masculine wedding band

Center 0.50 ct stone receives the largest sunburst. * Two 0.25 ct side stones receive proportionally smaller sunburs...

Can you create a very feminine diamond ring for a wedding ring and engagement multi stackable yellow, 14 carat gold that has 1 ct diamond 3 0.25 ct of diamonds 10 0.1 ct of diamonds 20 0.05 ct of diamonds Center 1 ct diamond being the sun

Can you create a very feminine diamond ring for a wedding ring and engagement multi stackable yellow, 14 carat gold that...

Can you create a very feminine diamond ring for a wedding ring and engagement multi stackable yellow, 14 carat gold that has 1 ct diamond 3 0.25 ct of diamonds 12 0.1 ct of diamonds 23 0.05 ct of diamonds Center 1 ct diamond being the sun 3 0.25 ct being the moon All other smaller diamonds, stackable rings for both sides of the engagement and wedding band All diamonds are round shape

Can you create a very feminine diamond ring for a wedding ring and engagement multi stackable yellow, 14 carat gold that...

Is this gold?

Is this gold?

Hey Ai. Generate an engagement ring picture for me in which in the centre there is diamond in marquis shape. Ring 15mm wide, On the side all around moon stones or little stones on the half of the covering 8 lines. Design on half of the ring and the ring is made with white gold.

Hey Ai. Generate an engagement ring picture for me in which in the centre there is diamond in marquis shape. Ring 15mm w...

Lakshmi moopu paper casting

Lakshmi moopu paper casting

14k white gold filagree vintage inspired diamond and emerald ring

14k white gold filagree vintage inspired diamond and emerald ring

𐒈𐒚𐒑𐒖𐒕𐒖

𐒈𐒚𐒑𐒖𐒕𐒖