← The Collection
Подвеска на нос с титана анодированного, легкая напечатанная на 3D принтере photorealistic jewelry design, Подвеска на нос с титана анодированного, легкая напечатанная на 3D принтере , just the design no text
none

Подвеска на нос с титана анодированного, легкая напечатанная на 3D принтере

Design something like thisTry it on virtually

Keep exploring

More None

Beautiful rose gold necklace

Beautiful rose gold necklace

bezel should be thinner to none when it reach the east and west sides of the oval

bezel should be thinner to none when it reach the east and west sides of the oval

the bezel seamlessly difuse from thick at north south to thin then none east west and in platinum

the bezel seamlessly difuse from thick at north south to thin then none east west and in platinum

Trump necklace

Trump necklace

Design a 2 carat teddy bear sitting on a white go bar with cable link chain on each side

Design a 2 carat teddy bear sitting on a white go bar with cable link chain on each side

I want to create a ring that has a butterfly on top with topaz and amethyst in the bottom, set on a diamond basil with diamonds on the side of the ring as well as the interior of the ring

I want to create a ring that has a butterfly on top with topaz and amethyst in the bottom, set on a diamond basil with d...

A flame unique design symbolizes fire

A flame unique design symbolizes fire

Silver eagle pendant wielding a red lightsaber, red being whatever gem is red

Silver eagle pendant wielding a red lightsaber, red being whatever gem is red

https://jewelryai.com/p/zAnahgqNmMzdxEn0LeVw

https://jewelryai.com/p/zAnahgqNmMzdxEn0LeVw

Tp pendant

Tp pendant

Crosscut oval ring gold band with a lotus setting

Crosscut oval ring gold band with a lotus setting

Locket is round shaped with an amethyst stone on top of an engraved Iris Flower

Locket is round shaped with an amethyst stone on top of an engraved Iris Flower

I need a gold hand chain with 3 pear shapes emerald on the center

I need a gold hand chain with 3 pear shapes emerald on the center

Create a photorealistic high-jewelry bangle based EXACTLY on the following design description. The piece is a refined, minimalist luxury bangle with a continuous circular silhouette and a sophisticated champagne-gold finish. OVERALL FORM A slim, rigid, circular bangle with a clean architectural silhouette. The bangle is relatively wide and flat rather than round or tubular. The body has a smooth, rectangular/flat-profile cross-section with softly refined edges. The overall form is elegant, minimal and understated, with no unnecessary ornamentation. The bangle has a warm champagne-gold color with a refined satin/brushed finish rather than a highly polished mirror finish. The metal should look like high-quality solid precious metal, with realistic weight, density and craftsmanship. The circular shape must remain perfectly proportional and symmetrical. PAVÉ SECTION One continuous section of the bangle is decorated with deep blue pavé gemstones. The pavé occupies only a defined portion of the circumference, while the majority of the bangle remains completely plain champagne gold. The transition between the plain gold section and the gemstone section is clean and intentional. The gemstones are extremely densely set in a pavé arrangement. The stones are small, individually distinguishable and irregularly varied in orientation, creating a rich natural gemstone surface. The gemstones are predominantly deep London Blue / cobalt blue. There are subtle variations between darker and slightly lighter blue stones, creating depth without losing the overall deep-blue identity. The stones should be highly realistic gemstones, with natural facets, individual reflections and realistic light dispersion. Do not make the gemstones look like blue glass, enamel, glitter, crystals or a continuous blue surface. Every stone should remain individually visible. DIAGONAL GOLD STRUCTURE The blue pavé section is divided by several narrow champagne-gold diagonal bands. These are NOT engraved lines. They are raised structural gold strands/bands integrated into the surface of the bangle. They cross diagonally over the pavé section. Each band follows the curvature of the bangle. The bands have the same champagne-gold color and satin finish as the main body. The diagonal bands create separate blue pavé segments. They are elegant, narrow and precisely integrated into the design. The bands should appear structurally intentional and seamlessly manufactured. Do not make them twisted rope. Do not make them wires. Do not make them chains. Do not make them decorative ribbons. They are solid, refined champagne-gold structural bands. The diagonal bands should have consistent proportions and spacing as shown in the reference. PAVÉ / GOLD RELATIONSHIP The blue gemstones sit beneath and between the champagne-gold diagonal structural bands. The bands visually embrace and divide the gemstone sections. The result should resemble flowing blue water or wind contained within an architectural gold structure. The gold bands create a rhythm across the blue pavé. The overall design is a contrast between: smooth champagne gold + deep London Blue gemstones + precise diagonal gold structures. PLAIN GOLD SECTION The majority of the circumference is completely plain champagne gold. This section must remain visually clean and uninterrupted. It has a subtle satin/brushed texture. The surface should show extremely fine realistic linear brushing when viewed close up. The plain gold section gradually transitions into the gemstone section without an abrupt change in thickness. The bangle remains the same width and thickness throughout. INTERIOR The inside of the bangle is smooth champagne gold. It is clean, refined and minimally finished. No gemstones are visible on the inner circumference except where the outer pavé construction naturally affects the structure. The interior follows the same continuous circular geometry. CONSTRUCTION This is a real, manufacturable fine-jewelry object. It must look physically constructed rather than digitally sculpted. All transitions between metal and gemstones should be technically believable. The gemstones must appear securely set. The gold bands must appear physically integrated into the bangle. The bangle must have realistic metal thickness. Edges should be precisely finished but subtly softened, as expected from high-end jewelry craftsmanship. No impossible geometry. No floating gemstones. No disconnected elements. No excessive ornamentation. DESIGN LANGUAGE Luxury high jewelry. Minimalist architectural jewelry. Contemporary Persian-inspired luxury aesthetic without literal traditional motifs. The emotional language is: wind movement protection strength softness water breath The piece should feel simultaneously delicate and powerful. COLOR PALETTE Main metal: warm champagne gold / soft antique champagne gold. Gemstones: deep London Blue deep cobalt subtle variations of blue occasional slightly brighter blue reflections. Supporting environment, if shown: warm ivory champagne beige soft stone subtle turquoise-blue accents. PHOTOREALISM The final bangle must look like a professionally manufactured high-jewelry piece photographed with a high-end macro camera. Use realistic precious-metal behavior. Realistic gemstone refraction. Realistic gemstone facets. Realistic pavé setting. Realistic micro-scratches and subtle surface texture. Realistic shadows. Realistic reflections. Realistic physical proportions. No CGI appearance. No plastic appearance. No excessive sparkle. No fantasy gemstones. No exaggerated gold color. No yellow gold. The metal must specifically read as sophisticated champagne gold. MOST IMPORTANT: Reproduce the EXACT DESIGN LOGIC of the reference. Do not redesign the bangle. Do not add decorative elements. Do not remove decorative elements. Do not change the proportion between the plain-gold section and the pavé section. Do not change the number, position or character of the diagonal gold bands. Do not replace the pavé with larger gemstones. Do not make the entire bangle gemstone-covered. Do not make the bangle thinner or thicker. Do not make it a traditional round wire bangle. It must remain a wide, flat-profile, architectural champagne-gold bangle with one concentrated section of deep London Blue pavé divided by narrow diagonal champagne-gold structural bands.

Create a photorealistic high-jewelry bangle based EXACTLY on the following design description. The piece is a refined, ...

Name plate Devon necklace

Name plate Devon necklace

Create ring similar to love in verona roberto coin ring make it it thicker (the band) and the flowers in fancy yellow diamond

Create ring similar to love in verona roberto coin ring make it it thicker (the band) and the flowers in fancy yellow di...

Collar con diamante talla pera Una pieza de elegancia atemporal, protagonizada por un diamante en talla pera que captura la luz desde cada ángulo. Su silueta delicada y sofisticada se complementa con una cadena fina, creando un diseño minimalista que aporta luminosidad y se adapta perfectamente tanto a looks cotidianos como a ocasiones especiales. Una joya sutil, elegante y eterna.

Collar con diamante talla pera Una pieza de elegancia atemporal, protagonizada por un diamante en talla pera que captur...

Sidabras ir gintaras vardines korteles laikykliai ant stalo keleta variantu

Sidabras ir gintaras vardines korteles laikykliai ant stalo keleta variantu

wings ring

wings ring

Vardines stalo korteliu laikikliai sidabras ir gintaras daud variantu

Vardines stalo korteliu laikikliai sidabras ir gintaras daud variantu

Stalo serveteles ziedai, su ivairiais gintaro gabaliukais ir skirtingu spalvu daug variantu

Stalo serveteles ziedai, su ivairiais gintaro gabaliukais ir skirtingu spalvu daug variantu

Make 3mm stainless steel ring with scattered sunburst diamonds in an organized style

Make 3mm stainless steel ring with scattered sunburst diamonds in an organized style

Jewish star made of stainless steel. The star is blue opal. No glue is used, it’s set in place by the steels bezel design. The back of the pendant is solid steel. The necklace will be sold under can wear double sided

Jewish star made of stainless steel. The star is blue opal. No glue is used, it’s set in place by the steels bezel desig...

25 carat lotus shaped pendant necklace with FL Nanette-cut turquoise sapphire gemstones and 18k gold chain

25 carat lotus shaped pendant necklace with FL Nanette-cut turquoise sapphire gemstones and 18k gold chain

Dobilo ziedas , serveteles ziedai restoranui, gintaras sidabras, keleta variantu

Dobilo ziedas , serveteles ziedai restoranui, gintaras sidabras, keleta variantu

Create a photorealistic high-jewelry pendant based strictly on the uploaded sketch. Preserve the exact silhouette, proportions, number of diamonds, positions, spacing, negative spaces and overall composition. Keep the central diamond as the dominant hero stone and preserve the four surrounding diamonds and their individual cuts and orientations. Use minimal refined 18K yellow gold, realistic secure settings and physically believable construction. Render exceptional natural white diamonds with crisp facets, realistic fire, scintillation and refraction. Contemporary haute joaillerie, sophisticated, elegant, minimal, luxurious, competition-level craftsmanship, pure white background and professional jewelry studio lighting. Do not redesign, add, remove or rearrange any element.

Create a photorealistic high-jewelry pendant based strictly on the uploaded sketch. Preserve the exact silhouette, propo...

I want a ring with three stones, purple, green, red. And I want it to be overly gothic, kinda like the universe Warhammer 40K

I want a ring with three stones, purple, green, red. And I want it to be overly gothic, kinda like the universe Warhamme...

White gold hoop earrings, flat with yellow brown diamonds 3.2 mm in the center, english clasp

White gold hoop earrings, flat with yellow brown diamonds 3.2 mm in the center, english clasp

Create a highly accurate 3D jewelry design based on the supplied reference image. Reproduce the ring’s overall architecture, proportions, stone placement, flowing metalwork, and botanical aesthetic as closely as possible. The ring is an elegant white-gold botanical/Art Nouveau–inspired cocktail ring built around a vertically oriented oval cabochon center stone. The center stone is held by four substantial sculptural claw prongs positioned approximately at the upper-left, upper-right, lower-right, and lower-left quadrants. The claws should emerge organically from the surrounding metalwork rather than appearing as separate straight prongs. Surround the center stone with a thin polished oval support/gallery following the stone’s outline. From this central structure, create asymmetrical flowing vines and branches that sweep outward across the shoulders of the ring. The vines should form graceful S-curves and loops, creating an open, airy framework rather than a solid halo. Incorporate leaf-shaped elements into the vines. Each leaf should have a pointed marquise-shaped outline, polished raised border, recessed interior, and a small round accent-stone setting centered within it. Leaves should appear to grow naturally from the curved branches. Add alternating round ruby and diamond accent settings throughout the vine structure. Use several different accent-stone sizes rather than making every stone identical. Larger rubies should act as visual anchors, with smaller rubies and diamonds filling transitional spaces. All round stones should use delicate individual prong settings integrated into the vines. Preserve the reference image’s intentionally asymmetrical composition: the right side rises higher and contains a more elaborate cluster of leaves, rubies, and diamonds, while the left side remains slightly lower and more restrained. Despite the asymmetry, the finished design should feel visually balanced around the center stone. The shoulders should transition into split, intertwined vine-like rails, eventually merging smoothly into a conventional polished rounded band toward the bottom of the shank. Maintain open negative spaces between the vines so the ring remains delicate rather than becoming a solid mass of metal. Important construction details: all decorative vines must physically connect to the main gallery or shoulders; every gemstone setting must have adequate metal beneath it; no floating components; no unsupported prongs; no impossibly thin wires; no intersecting geometry. Prongs should have sufficient thickness for casting and final stone setting. The center basket should provide continuous structural support beneath the cabochon while allowing an open underside. Finish: highly polished white gold, smooth organic transitions, rounded edges, fine-jewelry proportions, realistic castable construction. Avoid bulky CAD geometry, oversized prongs, generic halo-ring architecture, perfect bilateral symmetry, or disconnected decorative elements. Priority: match the reference ring’s silhouette and layout before introducing any creative interpretation. Treat the supplied image as the primary design reference. The finished model should immediately be recognizable as the same ring when viewed from the same three-quarter angle.

Create a highly accurate 3D jewelry design based on the supplied reference image. Reproduce the ring’s overall architect...

Create a highly accurate 3D jewelry design based on the supplied reference image. Reproduce the ring’s overall architecture, proportions, stone placement, flowing metalwork, and botanical aesthetic as closely as possible. The ring is an elegant white-gold botanical/Art Nouveau–inspired cocktail ring built around a vertically oriented oval black lightning ridge opal cabochon center stone. The center stone is held by four substantial sculptural claw prongs positioned approximately at the upper-left, upper-right, lower-right, and lower-left quadrants. The claws should emerge organically from the surrounding metalwork rather than appearing as separate straight prongs. Surround the center stone with a thin polished oval support/gallery following the stone’s outline. From this central structure, create asymmetrical flowing vines and branches that sweep outward across the shoulders of the ring. The vines should form graceful S-curves and loops, creating an open, airy framework rather than a solid halo. Incorporate leaf-shaped elements into the vines. Each leaf should have a pointed marquise-shaped outline, polished raised border, recessed interior, and a small round accent-stone setting centered within it. Leaves should appear to grow naturally from the curved branches. Add alternating round ruby and diamond accent settings throughout the vine structure. Use several different accent-stone sizes rather than making every stone identical. Larger rubies should act as visual anchors, with smaller rubies and diamonds filling transitional spaces. All round stones should use delicate individual prong settings integrated into the vines. Preserve the reference image’s intentionally asymmetrical composition: the right side rises higher and contains a more elaborate cluster of leaves, rubies, and diamonds, while the left side remains slightly lower and more restrained. Despite the asymmetry, the finished design should feel visually balanced around the center stone. The shoulders should transition into split, intertwined vine-like rails, eventually merging smoothly into a conventional polished rounded band toward the bottom of the shank. Maintain open negative spaces between the vines so the ring remains delicate rather than becoming a solid mass of metal. Important construction details: all decorative vines must physically connect to the main gallery or shoulders; every gemstone setting must have adequate metal beneath it; no floating components; no unsupported prongs; no impossibly thin wires; no intersecting geometry. Prongs should have sufficient thickness for casting and final stone setting. The center basket should provide continuous structural support beneath the cabochon while allowing an open underside. Finish: highly polished white gold, smooth organic transitions, rounded edges, fine-jewelry proportions, realistic castable construction. Avoid bulky CAD geometry, oversized prongs, generic halo-ring architecture, perfect bilateral symmetry, or disconnected decorative elements. Priority: match the reference ring’s silhouette and layout before introducing any creative interpretation. Treat the supplied image as the primary design reference. The finished model should immediately be recognizable as the same ring when viewed from the same three-quarter angle. Required dimensions: US ring size 7. Center setting designed specifically for a 6.0 × 7.2 mm oval cabochon. Model the center stone only as a removable reference volume; final manufacturing model should contain an empty seat for the cabochon. All accent gemstones should likewise be represented as setting blanks/seats rather than permanent stones. Preserve the apparent proportions of the reference design while scaling the surrounding ornamentation appropriately around the 6.0 × 7.2 mm center. Design for lost-wax investment casting and subsequent hand stone setting. Use practical minimum wall thicknesses, structurally supported galleries, properly connected prongs, accessible stone seats, and sufficient finishing allowance. Produce a watertight/manifold solid suitable for STL export, with no floating shells, non-manifold edges, self-intersections, or decorative geometry that cannot be cast or finished.

Create a highly accurate 3D jewelry design based on the supplied reference image. Reproduce the ring’s overall architect...

Men’s Persian signet ring, elephant shank, oval carnelian agate, raised crown setting, yellow gold

Men’s Persian signet ring, elephant shank, oval carnelian agate, raised crown setting, yellow gold

Double finger ring connecting the ring finger and pinky, 10K gold, shaped like a 7.62 caliber bullet, with the number 47 positioned between the two fingers, diamonds only on the numbers, realistic luxury jewelry render

Double finger ring connecting the ring finger and pinky, 10K gold, shaped like a 7.62 caliber bullet, with the number 47...

Hot pink Rolex watch

Hot pink Rolex watch

Watch Dial: Positioned in the center of the bracelet, featuring a small, elegant round shape with a polished gold bezel, golden dial face, minimalist gold hour markers, and hands. Bracelet Straps: Extending from both sides of the watch face are intricate leafy/floral-patterned straps, richly studded with alternating red ruby-like and clear diamond-like marquise-cut gems set in gold prong settings. Clasp & Detail: At the bottom end of the bracelet hangs a detailed gold connector ring with decorative textured embellishments.

Watch Dial: Positioned in the center of the bracelet, featuring a small, elegant round shape with a polished gold bezel,...

1.60 emerald cut and 1 ct marquise half bezel ring with curves

1.60 emerald cut and 1 ct marquise half bezel ring with curves

Create a modern, sculptural bypass engagement ring in 18K gold. The design should feature two different center diamonds placed opposite each other: a 1.04 ct natural marquise diamond, measuring 10.52 × 5.13 × 3.32 mm, on the left, and a 1.61 ct lab-grown emerald-cut diamond, measuring 8.12 × 5.51 × 3.48 mm, on the right. Both stones should be half bezel set, with the metal following the sides of each stone while leaving the top and bottom portions open to showcase the diamonds. The shank should have two flowing, curved bands that cross/bypass around the two stones, creating an open negative-space look similar to the reference image. Keep the design smooth, substantial, elegant, and wearable—not overly delicate.

Create a modern, sculptural bypass engagement ring in 18K gold. The design should feature two different center diamonds ...

Silver ring eith green avantiurin stone in all the midlle of all ring

Silver ring eith green avantiurin stone in all the midlle of all ring

Una collana d’oro sottile con al centro un piccolo cristallo a cerchio

Una collana d’oro sottile con al centro un piccolo cristallo a cerchio

Luxury brooch

Luxury brooch

Diamond wedding ring

Diamond wedding ring

Do a complet set tela colorr a ring a barcaletee and a ring neckles

Do a complet set tela colorr a ring a barcaletee and a ring neckles

bracciale bangles spesso circa 1 cm in oro con pietre piccoline

bracciale bangles spesso circa 1 cm in oro con pietre piccoline